Stucco & Exterior in Sherman Oaks
The order of work on a Sherman Oaks exterior, from choosing the seam between new and old stucco to the final color coat. Silver Pine Remodeling.
Deciding where the new wall ends and the old one begins comes ahead of every other step on a Sherman Oaks exterior. That seam, usually placed at an inside corner or a natural break in the wall, sets where the test patch goes, where paper and lath lap onto existing work, and where a color coat can stop cleanly. Once it is drawn, the rest of the job runs in a fixed order.
Sample, patch, approval
A chip of the existing finish is studied for its grain and trowel marks, and a test patch goes on a low-profile spot. Plaster lightens as it cures, so the patch sits for days before anyone judges it. Your approval of that patch is what releases the material order, and nothing past that point moves without it. Booking the plaster crew earlier would risk carrying a mismatch across the whole wall. The approved patch then stays in place as the reference for every coat that follows, right up to the color.
Layers from the framing out
On the open wall, the water-resistive barrier goes on first, 2 layers of building paper over wood sheathing, lapped so each upper course overlaps the one beneath. Window and door flashing is woven into those laps. Metal lath is then fastened over the paper into the framing, with a weep screed at the base. The scratch and brown coats follow, each given time to cure, and the finish coat carries the approved texture. Color goes on last, across one wall or the whole house, and trim that touches the plaster is painted once everything behind it is dry.
Stucco & Exterior in Sherman Oaks: what families ask
In texture, it can, provided a test patch is approved before the main wall is plastered. Matching shade is harder because sun fades older stucco unevenly. Extending the color coat around a corner or onto the adjoining wall gives the eye a natural stopping point, so the joint stops drawing attention.
Only when it serves the house. One freshly colored wall can show a line against faded neighbors, and a full recoat gives every side the same starting point as it ages. Both routes, with what each involves, get laid out at the wall so you can choose.
Yes. Cracks, damaged lath, siding and trim can be handled as a project on their own. The first step is finding what let the damage start, such as a leaking gutter or a failed seal at a window, because a patch over an active leak tends to crack or loosen again.
Stucco & Exterior in other cities
Other projects we take on in Sherman Oaks
Your Sherman Oaks project, start to finish
Tell us about the house and the space you need. We reply by phone or email to plan a visit.