Windows & Doors in Pasadena, drawn for plan review
Windows and doors for Pasadena homes, drawn for city plan review, with safety glass, escape sizes and ember-resistant units where the fire map applies.
Bedroom escape sizes, safety glass at doors and tubs and the energy label on each new unit fill most of a Pasadena reviewer's checklist for a window and door permit. We put every answer on the drawings before submittal. Part of Pasadena also lies in mapped fire hazard zones, and a lot there may face ember-resistance rules for glazing and exterior doors, which the reviewer checks against the product listings.
The schedule the reviewer reads
Each opening gets its own line on the window and door schedule: room, size, operation, glass type and rated performance. That lets the reviewer confirm without guessing that a bedroom casement clears the minimum opening and that a pane within reach of a swinging door is tempered. Where an opening is being widened, the engineer's header size goes on the same sheet, next to the wall it sits in. The schedule is assembled before submittal, so comments come back as specific questions with the answers already drawn.
When the lot is on the hazard map
The address gets checked against the fire hazard map at the first visit, because the answer changes what can be ordered. Inside a mapped zone, exterior glazing goes in as a multipane unit with a tempered pane, exterior doors need a noncombustible or solid-core build, and vents near the openings take fine metal mesh. Those choices land on the schedule with their product listings, so the reviewer and later the field inspector check the same units. Door weatherstripping gets a look too, since a worn seal leaves a gap where embers can settle.
Windows & Doors in Pasadena: what families ask
A window that opens from inside without a key or tool and leaves a clear gap big enough for a person to climb out. The code sets a minimum clear area, width and height, and a maximum sill height above the floor. On a Pasadena lot inside a hazard zone, the glass in that window also has to meet the ember-resistance rules.
In most cases, yes. Frame width, grid layout and color are what make a new window look like it belongs, so those are matched, with a sample checked against the wall in daylight. Where the surrounding units are worn out, swapping the full set can read cleaner.
Both work. An addition's windows go into the same drawings and permit as its walls, so headers and sill heights are fixed with the framing. Where nothing is being added, windows and doors can be replaced under their own quote.
Windows & Doors in other cities
Other projects we take on in Pasadena
Your Pasadena project, start to finish
Tell us about the house and the space you need. We reply by phone or email to plan a visit.